(PECL win32service >=0.1.0)
win32_create_service — Creates a new service entry in the SCM database
Attempts to add a service into the SCM database. Administrative privileges are required for this to succeed.
details
An array of service details:
service
The short name of the service. This is the name that you will use to control the service using the net command. The service must be unique (no two services can share the same name), and, ideally, should avoid having spaces in the name.
display
The display name of the service. This is the name that you will see in the Services Applet.
description
The long description of the service. This is the description that you will see in the Services Applet.
user
The name of the user account under which you want the service to run. If omitted, the service will run as the LocalSystem account. If the username is specified, you must also provide a password.
password
The password that corresponds to the user
.
path
The full path to the executable module that will be launched when the service is started. If omitted, the path to the current PHP process will be used.
params
Command line parameters to pass to the service when it starts. If you want to run a PHP script as the service, then the first parameter should be the full path to the PHP script that you intend to run. If the script name or path contains spaces, then wrap the full path to the PHP script with ".
load_order
Controls the load_order. This is not yet fully supported.
svc_type
Sets the service type. If omitted, the default value is
WIN32_SERVICE_WIN32_OWN_PROCESS
.
Don't change this unless you know what you're doing.
start_type
Specifies how the service should be started. The default is
WIN32_SERVICE_AUTO_START
which means the
service will be launched when the machine starts up.
error_control
Informs the SCM what it should do when it detects a problem with
the service. The default is
WIN32_SERVER_ERROR_IGNORE
. Changing this
value is not yet fully supported.
delayed_start
If delayed_start
is set to TRUE
, then this
will inform the SCM that this service should be started after other
auto-start services are started plus a short delay.
Any service can be marked as a delayed auto-start service; however,
this setting has no effect unless the service's
start_type
is
WIN32_SERVICE_AUTO_START
.
This setting is only applicable on Windows Vista and Windows Server 2008 or greater.
base_priority
To reduce the impact on processor utilisation, it may be necessary to set a base priority lower than normal.
The base_priority
can be set to one of the
constants define in
Win32 Base Priority Classes.
dependencies
To define the dependencies for your service, it may be necessary to set this parameter to the list of the services names in an array.
recovery_delay
This parameter defines the delay between the fail and the execution of recovery action. The value is in milliseconds.
The default value is 60000.
recovery_action_1
The action will be executed on first failure. The default value is
WIN32_SC_ACTION_NONE
.
The recovery_action_1
can be set to one of the
constants defined in
Win32 Recovery action.
recovery_action_2
The action will be executed on second failure. The default value is
WIN32_SC_ACTION_NONE
.
The recovery_action_2
can be set to one of the
constants defined in
Win32 Recovery action.
recovery_action_3
The action will be executed on next failures. The default value is
WIN32_SC_ACTION_NONE
.
The recovery_action_3
can be set to one of the
constants defined in
Win32 Recovery action.
recovery_reset_period
The failure count will be reset after the delay defined in the parameter. The delay is expirement in seconds.
The default value is 86400.
recovery_enabled
Set this parameter at TRUE
to enable the recovery settings, FALSE
to disable.
The default value is FALSE
recovery_reboot_msg
Set this parameter to define the message saved into the Windows Event
Log before the reboot. Used only if one action is set to
WIN32_SC_ACTION_REBOOT
.
recovery_command
Set this parameter to define the command executed when one action is defined on
WIN32_SC_ACTION_RUN_COMMAND
.
machine
The optional machine name on which you want to create a service. If omitted, it will use the local machine.
Gibt im Erfolgsfall WIN32_NO_ERROR
zurück oder FALSE
, wenn es ein Problem mit den Parametern gab oder einen Win32-Fehlercode im Fehlerfall.
Beispiel #1 A win32_create_service() example
Create a service with the short name 'dummyphp'.
<?php
$x = win32_create_service(array(
'service' => 'dummyphp', // the name of your service
'display' => 'sample dummy PHP service', // short description
'description' => 'This is a dummy Windows service created using PHP.', // long description
'params' => '"' . __FILE__ . '" run', // path to the script and parameters
));
debug_zval_dump($x);
?>
Beispiel #2 A win32_create_service() example with dependencies
Create a service with the short name 'dummyphp' and dependencies.
<?php
$x = win32_create_service(array(
'service' => 'dummyphp', // the name of your service
'display' => 'sample dummy PHP service', // short description
'description' => 'This is a dummy Windows service created using PHP.', // long description
'params' => '"' . __FILE__ . '" run', // path to the script and parameters
'dependencies' => array("Netman"), // The list of the dependencies
));
debug_zval_dump($x);
?>
Beispiel #3 A win32_create_service() example with recovery
Create a service with the short name 'dummyphp' and recovery settings.
<?php
$x = win32_create_service(array(
'service' => 'dummyphp', // the name of your service
'display' => 'sample dummy PHP service', // short description
'description' => 'This is a dummy Windows service created using PHP.', // long description
'params' => '"' . __FILE__ . '" run', // path to the script and parameters
'recovery_delay' => 120000, // Recovery action is executed after 2 minutes
'recovery_action_1' => WIN32_SC_ACTION_RESTART, // On first failure, restart the service
'recovery_action_2' => WIN32_SC_ACTION_RUN_COMMAND, // On second failure, execute the commmand
'recovery_action_3' => WIN32_SC_ACTION_NONE, // On other failure, do nothing
'recovery_reset_period' => 86400, // Reset the fail counter after 1 day
'recovery_enabled' => true, // Enable the recovery parameter
'recovery_reboot_msg' => null, // Do not define a reboot message, it's not needed here
'recovery_command' => "c:\clean-service.bat", // When the action is WIN32_SC_ACTION_RUN_COMMAND, execute this command
));
debug_zval_dump($x);
?>
Version | Beschreibung |
---|---|
0.4.0 |
The dependencies , recovery_delay ,
recovery_action_1 , recovery_action_2 ,
recovery_action_3 , recovery_reset_period ,
recovery_enabled , recovery_reboot_msg
and recovery_command parameters have been added.
|